| HOME // Defi // Meter Hood & Option |
| Defi-Link Single Meter Visor | Defi-Link Fitting Kit | Defi-Link Indicator II |
 |
|
| Defi-Link Single Meter Visor |
 |
|
Defi-Link Single Meter Visor is for removing the virtual image of gauges reflected on the windshield. It is for only 2 3/8"(60mm) diameter gauges. |
|
 |
Removes the virtual image of the meter reflected on the windshield. |
|
Light weight |
|
Easy to attach |
|
|
|
| Defi-Link Single Meter Visor - HOW TO INSTALL - |
1. Attach the buffer around the meter as shown in the picture.
2. Fit the meter into the visor.
3. Connect wires to the backside of the meter.
4. Attach a double-sided tape on the backside of the meter.
5. Fit the meter into the meter cup(sold separately). |
|
| CONFIRMATION |
 |
This product is designed for Defi-Link Meter 2 3/8"(60mm) diameter and Defi-Link Meter BF. |
|
Meter, meter cup, and holder are not included in the product. |
|
|
| Defi-Link Fitting Kit |
 |
|
Defi-Link Fitting Kit is to mount a gauge on an A-pillar or a steering column. This product is for 2 1/16"(52mm), 2 3/8"(60mm), and 3 1/8"(80mm) gauges. |
|
|
Meters can be mounted on an A-pillar or a steering column. |
|
Free installation angle |
|
|
|
| Defi-Link Single Meter Visor - HOW TO INSTALL - |
1. Take the resin part of A-pillar or steering column apart.
2. Drill 2 holes in the resin(0.17in diameter). (Picture 1)
3. Fasten the metal fitting and rubber fitting with two M4 x 12 bolts and two nuts to the resin. (Picture 1)
4. Fix the resin part where it was.
5. Fix a meter cup(sold separately) to the metal fitting with a M4 x 30 bolt and a nut. (Picture 2)
6. Attach the buffer around the meter.(Picture 3)
7. Fit the meter into the meter cup(sold separately) and connect wires. (Picture 4) |
|
| CONFIRMATION |
|
This product is designed for Defi-Link Meter(except 4 1/2in dia) and Defi-Link Meter BF. |
|
Meter cup and holder need to be purchased. |
|
Do not install this product where it may disturb the driving sight. |
|
|
|
|
|
 |
| Defi-Link Indicator II |
 |
Defi-Link Indicator II is a warning indicator which can be connected to Defi-Link Meter, Defi-Link Meter BF, Defi-Link Display, and Step Graph. Two LEDs(green & red) are built-in and each LED blinks separately. By connecting this product to Defi-Link Control Unit II, it can be used as a "Master-Warning" indicator. |
 |
|
|
|
Machined finished surface of aluminum |
|
High visibility by a large diameter body and super high bright LEDs |
|
LEDs blink simultaneously with the Defi-Link System |
|
Can be attached to various positions |
|
Can be used for various purposes with two LEDs |
|
|
| No-warning |
Green |
Red |
Green and Red |
 |
 |
 |
 |
|
|
| Defi-Link Indicator II - SPECIFICATIONS - |
| Power Supply Voltage |
Supplied from Control Unit II
or Control Unit (Exclusive for 12V vehicle) |
| Operational Temperature Range |
-20 to +60°KC,
-4 to +140°KF
(under 80% relative humidity) |
| Operational Temperature Range |
-20 to +60°KC,
-4 to +140°KF
(under 80% relative humidity) |
| Gross Weight |
150g, 0.33lb (including wires
and package) |
| Connectable Products |
Defi-Link Meter
Defi-Link Meter BF
Defi-Link Display
Defi-Link Control Unit II
Step Graph |
|
|
| Official Distributor for Defi Products in Europe. Defi graphics & text use by kind permission of NIPPON SEIKI CO.LTD |
|
|
