 |
Stepping motor "STS26A"
Maximum angle of deflective 270 degrees (full sweep) is controlled by the microcomputer up to 4600 division (0.057degrees each) to provide high precision in the accuracy of information generated. The stepping motor is sufficient for quick response of all sorts of professional motorsports. |
| |
The scale is compressed to acquire great visibility and ease of use.
*Wide-angle scale is used at the idling range 0~3,000RPM.
*The scale is fitted to recent engine power band and linear scale is used from 3,000RPM to 11,000RPM.
|
 |
|
|
LED illumination
|
| |
The gauge dial is invisible while the ignition switch is off. Once the ignition switch is turned on, a clear display appears by colored LED illumination. The gauge dial illumination and the red emitting needle pointer provide high visibility. |
|
Opening and closing modes |
| |
The gauge dial and the needle pointer performs opening and closing modes interlocked with turning ON/OFF of the ignition. Refer to the movie of Defi-Link Meter BFs. |
| |
 |
|
Adjustable brightness |
| |
There are 5 stages of brightness for the daytime and 6 stages for the nighttime. The brightness can be decreased/increased with the vehicle lights switched on/off. |
|
Dual warnings of light and buzzer |
| |
Two customer-defined warning RPMs can be set. When the RPMs are exceeded, the warning LED blinks/lights up and the warning buzzer sounds.
 |
|
Exclusive large-sized indicator |
| |
The exclusive large-sized indicator which lights in green and red enhances the visibility of warnings in addition to the warning LED in the gauge.
   |
|
Peak memory function |
| |
The maximum RPM during driving can be stored and checked later.
 |
|
Detachable switch unit |
| |
The large-sized switch unit with light is fixable on the gauge and is also detachable.
   |
|
Exclusive mounting band and back case |
| |
The gauge is clinched by using the exclusive mounting band and back case. Wires can be stored in the back case neatly. |
| |
   |
|
Integrated rev adapter |
| |
By having the Defi rev adapter built-in, the tachometer works on vehicles with DIS (Distributor-less Ignition System) which engine speed signals cannot be picked up due to connection vehicle control units with serial communication. |
|
Gauge dials are invisible while the ignition switch is off. Once the ignition switch is turned on, a clear display appears with white LED illumination. A red emitting needle pointer increases visibility. |
| |
  |
|
The illumination color can be chosen from white, amber red, and blue. |
| |
*The illumination color cannot be changed.
*Blue models are NOT available in USA. Instead of BF blue models,Blue Racer Gauges are available in USA. |
|
Regular Position Bezel for 80mm (3 1/8") gauge is included in the product. |
 |
Defi-Link Meter BF is applicable only for 12V vehicles. |
